Thanks to Five Star Games and Sega be sure to enter for your chance to win a copy of Yakuza Kiwami!
Win! A Copy of Yakuza Kiwami: Steelbook Edition on PS4
Developer Volition's follow-up to the Saints Row series doesn't stray too far from the over-the-top and entertaining nature of the series.
Saturday Morning Saints - Agents of Mayhem Reviewed!
We review Episode 1 of Season 2 of Telltale's Batman series, "Enigma".
The Dark Knight Returns in Telltale's Batman - The Enemy Within
From Fullbright, the developer of Gone Home, comes Tacoma. A sci-fi interactive story quite unlike anything we've played before.
Tacoma Review - 2088: A Space Oddity
Port forwarding driving me bananas
d0mino
Melbourne, Victoria
5289 posts

I am trying to open up some of ports on my router (Belkin f9j1102).

EVERYTHING I try doesn't work, except putting my server in the DMZ (Outside the NAT firewall) and I don't want to leave it like that.

I am checking the port using the tool at this website: http://www.yougetsignal.com/tools/open-ports/

Things i've tried.

Disabling firewall on the router = no joy.
Disabling firewall on the target computers = no joy.
Enabling virtual servers in the firewall of the router = no joy.

If anyone has any ideas on how to fix it that would be much appreciated.

08:20pm 04/03/13 Permalink
system
Internet
--
08:20pm 04/03/13 Permalink
Mitch
Western Australia
541 posts
try following the steps used from here http://portforward.com/english/routers/port_forwarding/Belkin/F9J1102v1/default.htm

Maybe you missed something when setting up a virtual server.
08:27pm 04/03/13 Permalink
Spook
Brisbane, Queensland
35275 posts
what are you trying to open the port for? utorrent? battlefield 3?
08:28pm 04/03/13 Permalink
d0mino
Melbourne, Victoria
5290 posts
I am trying to open the port for remote access of filemaker pro (project management software).
08:33pm 04/03/13 Permalink
d0mino
Melbourne, Victoria
5291 posts
edit (doesn't work for me either): I also tried the steps on port forwarding guide and it doesn't work for me.
08:38pm 04/03/13 Permalink
parabol
Brisbane, Queensland
7501 posts
Time to post screenshots of your virtual server settings if you would like further troubleshooting help ...
09:12pm 04/03/13 Permalink
d0mino
Melbourne, Victoria
5292 posts
09:16pm 04/03/13 Permalink
crazymorton
Brisbane, Queensland
3948 posts
Do you have any virus software that you need to configure or turn off?
09:17pm 04/03/13 Permalink
d0mino
Melbourne, Victoria
5293 posts
I am running max os x (lion server), no virus software. Os x firewall is off, router firewall is off. Only can get access to the port (according to http://www.yougetsignal.com/tools/open-ports/) when I put it in the DMZ.
09:27pm 04/03/13 Permalink
crazymorton
Brisbane, Queensland
3949 posts
Have you tried the actual program?

I'm not sure about that port site, I checked a couple of ports I know I have open and it says they're not.
09:42pm 04/03/13 Permalink
Whoop
Brisbane, Queensland
21493 posts
I use this one to check if my ports are open (I know a lot of people hate this guy, i just use the port scanner)

http://www.grc.com/default.htm go to shields up, its in there somewhere
09:46pm 04/03/13 Permalink
HerbalLizard
Brisbane, Queensland
5735 posts
Tried disabling nat and then tried the port forward, then turn nat on again? Could be some odd firewall rule that's not being applied in the firmware properly.

Speaking of firmware have you updated it?

12:04am 05/03/13 Permalink
HerbalLizard
Brisbane, Queensland
5736 posts
Do you have a separate modem and is it running in bridge mode??? Or are you running double nat?
12:07am 05/03/13 Permalink
HerbalLizard
Brisbane, Queensland
5737 posts
Sorry for the tripling up of posts, if you are running say westnet / iinet / internode is the ISP network firewall off as well.

You could also try grabbing the modem enable the firewall on the server create a PPPoE interface bridge the modem into that then test. Could be the forward facing modem at fault.

Can you get another pc plug it into the wan port on the router after you have opened up the ports then run a port scan which also rules out the above.
What does the router logs say?
What does the modem logs say?

Can you forward anything else / common ports ssh (port22) into the server for instance?

It wouldn't be the first time I have seen a router totally ignore forwards or a gui that doesn't do what its supposed to
12:16am 05/03/13 Permalink
system
Internet
--
12:16am 05/03/13 Permalink
AusGamers Forums
Show: per page
1
This thread is archived and cannot be replied to.