The next-generation of videogame graphics will be defined by real-time ray-tracing. From Cyberpunk 2077 to Dying Light 2, we go through the ray-traced games on the horizon.
Real-Time Ray-Tracing and The Next-Gen Games We’ll Play
Hideo Kojima's latest looks wonderful running on a modern PC rig, and it's still as weird and strange and alluring as ever.
Death Stranding on PC - A Stunning Odyssey by the Oddity
From mash-up to sampling to festival culture and dance music, Harmonix’s latest puts player choice and expression front-and-centre.
FUSER - Harmonix Sets its Sights on Festival Lights
The latest June 2020 quarterly update on Diablo IV is a treasure trove of new info, so let’s break it down.
Diablo 4 Update – Open World, Events, Legendary Gear, and More
Could You please Update my Punkbuster on my Server
Towley
Sydney, New South Wales
4 posts
I believe it is out of date I have checked with Evenbalance website
GGC Stream shows I have an old version
I cannot stay connected to my server however I have no issues connecting to other Ausgamers hosted BF4 Servers.

http://i.imgur.com/AdwE5oF.png
10:55am 09/11/13 Permalink
system
Internet
--
10:55am 09/11/13 Permalink
Eorl
Brisbane, Queensland
10690 posts
We are currently investigating this issue and will have more information shortly.
11:59am 09/11/13 Permalink
Malthius
Brisbane, Queensland
1025 posts
I've identified the cause and a fix is in progress. We can also manually fix server while the permanent fix is in progress.

I couldn't actually find your server in the list Towle, so if you can give me the ip:port or server name i can update it manually.
01:39pm 09/11/13 Permalink
Borr
Melbourne, Victoria
13 posts
I've identified the cause and a fix is in progress. We can also manually fix server while the permanent fix is in progress. I couldn't actually find your server in the list Towle, so if you can give me the ip:port or server name i can update it manually.



Sent you a PM Malthius, hoping you can help me with my server i just rented
08:19pm 09/11/13 Permalink
JWMutant
Adelaide, South Australia
6 posts
Would love a manual update on a new server here too if you get the time.

203.46.105.21:22505

Added today, but old PB, and pb_sv_update fails as it can't find dns to evenbalance.
01:45am 10/11/13 Permalink
JohnTowle
Sydney, New South Wales
5 posts
I have sent a PM to Malthius with server details
10:28am 10/11/13 Permalink
Borr
Melbourne, Victoria
14 posts
ok so i havent had any response and my server is still kicking anyone who joins.

the address is :203.46.105.71:29555

if someone could help me that would be great.
01:25pm 10/11/13 Permalink
JohnTowle
Sydney, New South Wales
6 posts
ok so i havent had any response and my server is still kicking anyone who joins.the address is :203.46.105.71:29555if someone could help me that would be great.



Same situation here, PB is old and that is what is kicking me and anyone else. no wonder the server is empty all the time !!

I am sure this will be fixed soon but I would like a credit on the days it has been empty due to this issue.. The PB update was released a month ago by EvenBalance according to their website.
02:16pm 10/11/13 Permalink
Eorl
Brisbane, Queensland
10695 posts
Hey all,

Just an update on this Punkbuster issue, we've discovered that our new mitigation service is interfering with the automatic update, causing some user to be kicked from our servers due to the out-of-date PB. We have our technicians looking at the problem now and are hoping to have it fixed by Monday at the latest.

We are committed to offering the best service for our customers, and as such will not be charging server subscriptions until after we have fixed this issue and players are able to successfully play.
03:08pm 10/11/13 Permalink
Malthius
Brisbane, Queensland
1028 posts
All of these are now up to date. We'll have a more permanent fix on Monday.
03:41pm 10/11/13 Permalink
Towley
Sydney, New South Wales
8 posts
All of these are now up to date. We'll have a more permanent fix on Monday.


Ok thanks Ausgamers but my GGC streams and PBBans are indicating they are not streaming anymore. Have the files been altered?
10:19pm 10/11/13 Permalink
Malthius
Brisbane, Queensland
1029 posts
PBBans should work, I'll check the logs. GGC will start working today.
11:00am 11/11/13 Permalink
Towley
Sydney, New South Wales
9 posts
GGC is working PBBANs is not

I have run the automated setup described below and they say to raise a ticket with my RSP . I cannot find this file pbsvuser.cfg in my file section . So that may be the problem.



All none streaming issues are client side.

The first thing to do when a server just stops streaming is to run the Automated Hub Setup again;
http://www.pbbans.com/automated-streaming-setup.html

If you are having to go through the setup procedure every time the server restarts, it's obvious that your server is on a "crontab" of sorts and the server is loading a default cfg that does not contain your streaming commands that you sent to it in the setup phase, or your streaming settings are being held in a file that is not loaded by default after a server restart.
If you can not figure it out yourself, raise a ticket with your RSP and tell them what your issue is .. hopefully they can then sort it out for you :)

The correct file system within your PB directory should be;

pbsv.cfg - contains all your PB server settings (including your pbucon settings)

pbsvuser.cfg - contains all the scans (MD5 etc) that a server admin wishes to run on his server.

pbucon.use - is a file that is only needed to run pbucon and is best left blank.



Make sure java is up to date before trying the auto hub set up.

There are other methods of initiating streaming outlined here;

http://www.pbbans.com/info-center-hubguide.html
05:31pm 11/11/13 Permalink
Malthius
Brisbane, Queensland
1039 posts
PBBans should work, I'll check the logs. GGC will start working today.

I may have been wrong about this, I expected this to begin working today, but it may be tomorrow - I've asked for an urgent status update.
05:40pm 11/11/13 Permalink
Malthius
Brisbane, Queensland
1040 posts
Also, once I've confirmed the other issues are resolved, I'll be happy to configure the server to stream for you.
05:42pm 11/11/13 Permalink
Towley
Sydney, New South Wales
10 posts
Also, once I've confirmed the other issues are resolved, I'll be happy to configure the server to stream for you.



[INIT] Opening connection ...
[MSG] Connection opened
[MSG] Checking PB version ( pb_sv_ver )
[RESP] Server replied: PunkBuster Server: PunkBuster Server for BF4 (v1.880 | A1390 C2.332) Enabled

[MSG] Checking present ucon profiles ( pb_sv_uconlist )
[RESP] Server replied: PunkBuster Server: [Slot] [Type] [Mask] [Name]
PunkBuster Server: 1 1 85.114.136.131 ggc_85.114.136.131
PunkBuster Server: 2 1 85.114.136.132 ggc_85.114.136.132
PunkBuster Server: 3 1 85.114.136.133 ggc_85.114.136.133
PunkBuster Server: 4 1 69.65.22.152 pbbhub2-1
PunkBuster Server: 5 1 69.65.22.153 pbbhub2-2
PunkBuster Server: 6 1 69.65.22.154 pbbhub2-3
PunkBuster Server: End of PB UCON Profile List (6 Entries)

[NOTICE] Deleting old ucon profile 4 ( pb_sv_ucondel 4 )
[RESP] Server replied: PunkBuster Server: PB UCON Slot #4 deleted

[NOTICE] Deleting old ucon profile 5 ( pb_sv_ucondel 5 )
[RESP] Server replied: PunkBuster Server: PB UCON Slot #5 deleted

[NOTICE] Deleting old ucon profile 6 ( pb_sv_ucondel 6 )
[RESP] Server replied: PunkBuster Server: PB UCON Slot #6 deleted

[MSG] Setting sessions limit ( pb_sv_usessionlimit 8 )
[RESP] Server replied: PunkBuster Server: pb_sv_USessionLimit = 8 (0 to 16)

[MSG] Adding ucon profile for PBBans Hub ( pbbhub2-1 )
[MSG] Adding additional ucon profile for PBBans Hub ( pbbhub2-2 )
[MSG] Adding additional ucon profile for PBBans Hub ( pbbhub2-3 )
[MSG] Setting pbbans.dat autoupdate ( pb_sv_autoupdban 1 )
[RESP] Server replied: PunkBuster Server: pb_sv_AutoUpdBan = 1 (0 to 1)

[MSG] Adding heartbeat task ( pb_sv_task 0 3600 pb_sv_ver )
[RESP] Server replied: PunkBuster Server: PB Scheduled Task Added: 0 3600 pb_sv_ver

[MSG] Saving settings into pbsv.cfg ( pb_sv_writecfg )
[RESP] Server replied: PunkBuster Server: Config File written to C:\games\gamecreate-agsr\GameCreate-6202\bf4\22250\pb\pbsv.cfg

[MSG] No error occured during setup. Server should be ready to stream
[MSG] Closing connection ...
[MSG] Connection closed
09:37am 12/11/13 Permalink
Eorl
Brisbane, Queensland
10708 posts
PBBANS, ProCon Layer and GameTracker should all be working properly now. Thanks for waiting it out guys and gals!
03:03pm 12/11/13 Permalink
system
Internet
--
03:03pm 12/11/13 Permalink
AusGamers Forums
Show: per page
1
This thread is archived and cannot be replied to.